Connect the case cooling fan connector to FAN1.Ħ. CPU FAN & FAN1 Plug the CPU cooling fan cable into the 3-pin CPU FAN power supply on the mainboard. Front Panel Connector: FP1 Attach the power LED, IDE LED, reset switch and power switch connectors to the corresponding pins.ĥ. You will be unable to flash the BIOS to the motherboard when the system BIOS is protected.Ĥ. BIOS-Protection Jumper (optional): FWH_EN If the jumper FWH_EN set as “Disable” (pin2 & pin3), the system BIOS is protected from being attacked by a serious virus, such as the CIH virus. Return the jumper setting to normal (pin2 and 3 together with the jumper cap). Turn off the AC power supply and connect pin 1 and 2 together using the jumper cap. To clear the CMOS, follow the procedures described below. Clear CMOS Jumper: CLS_CMOS You can clear CMOS to restore default system setting. In 6-Channel mode, the function of the three jacks becomes Rear Speaker Out, Front Speaker Out and Center/Subwoofer Speaker respectively.Īccessory Checklist K7S741MG/K7S741GXMG Motherboard (x1) WinFast Utility CD (x1) Easy Installation Guide (x1) IDE Ribbon Cable (x1) FDD Ribbon Cable (x1) I/O Shield (x1)ĬPU: K7S741MG: Supports AMD K7 Duron, Athlon, Athlon XP Supports 266/333/400 MHz FSB K7S741GXMG: Supports AMD K7 Duron, Athlon, Athlon XP Supports 266/333 MHz FSB The Line-out jack is for a headphone or a speaker.
The Line-in jack is for a tape player or other audio sources. Use the three audio ports to connect audio devices. Line-in jack, Line-out jack, Microphone jack
7 LAN Connector This port allows connection to a Local Area Network (LAN) through a network hub. USB 2.0 Ports These four Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. The VGA connector is for output to a VGA-compatible device. Parallel Port (Printer Port) This 25-pin port connects a parallel printer, a scanner, or other devices. Serial Port (COM1) This 9-pin COM1 port is for pointing devices or other serial devices. This purple 6-pin connector is for a PS/2 keyboard. PS/2 Mouse Connector This green 6-pin connector is for a PS/2 mouse. K7S741MG/K7S741GXMG Rear Panel 4 Parallel Port (Printer Port) Remark: The above motherboard layout is provided for reference only please refer to the physical motherboard.
Easy Installation Guide K7S741MG/K7S741GXMG LayoutĤ62-pin CPU Socket SiS 741/741GX Chipset USB2.0 Connector CPU FAN Connector SiS 963L ChipsetĬlear CMOS Jumper IR Connector (optional) BIOS-Protection Jumper (optional) Front Panel SYS FAN SPEAKER ATA 66/100/133 FDD Connector Connector Connector Connector IDE Connectors
0 kommentar(er)
